The T45 units are fully serviceable and can be rebuilt in situ with only a few minutes down time.
T45C Helicopter Tie Downs
Part No. 2037SY
The T45C is designed for commercial operations where helicopter movements have to be performed with ground crew in foul weather gear and fire proof gloves and overalls. It is the largest of the family and offers easy operation with gloved hands in all weathers. It is used in high-density flight deck/hanger installations and is only suitable for Weld in applications.
T45R Helicopter Tie Downs
The T45R has been designed to have all of the performance characteristics of the T45C but in a smaller package. The eye in the T45R will revolve and allow alignment with the aircrafts position on the deck. This allows a lower density of tie downs to service flight deck. It also provides flexibility allowing a large range of aircraft types to be accommodated. This unit is available in both 'bolt in' and 'weld in' formats.
T45 Tie Down Specifications
T45C
| T45R
| |
|---|---|---|
| strength* | 22 tonnes |
22 tonnes |
| Weight | 8kg |
5kg |
| DIA | 167mm |
142mm |
| SWL* | 44KN (4.5 tonnes) |
45KN (4.5 tonnes) |
| Safety Factor | 5:1 |
5:1 |
*Strength and Safe working load figures are calculated on a 45 degree line of pull, with the 4 Bar model fully lifted from its folded/ closed position.
Part No. T45C - 2037SY
Part No. T45R - 2080SY - Bolt In
Part No. T45R - 2079SY - Weld In
